Common PC Errors (Mga madalas sira ng isang Personal Computer)

Error No.1: Monitor led is blinking
Solution: Check all the connections like Monitor Cable, Data cables, RAM, Display Card, CPU Connections etc.
(Tingnan lahat ng connections gaya ng Cable ng Monitor, Data Cables, RAM, yung Video Card at CPU Connections)


Error No.2: Continuous Three Beeps
Solution: Problem in RAM Connection. 
(Paki check na lang ng memory card baka maluwag ang pagkaka-kabit)

Error No.3: Three Beeps (i.e. 1 long and 2 short)
Solution: Problem in Display Card Connection
(I-check ang video card baka maluwag ang pagkaka-kabit o aya naman ay baka madumi)

Error No.4: Three long Beeps Period wise
Solution: Problem in BIOS or RAM
(Check mo ang BIOS at memory card ng computer mo)

Error No.5: Continuous non-stop Beeping
Solution: Key Board Problem (i.e. some key is pressed for longer time)
(Maaaring may problema na ang keyboard mo, minsan kasi napipindot natin ito ng matagal at naii-stock, maaaring linisan ang keyboard upang hindi na kumalat ag sira)

Error No.6: NO display on the screen
Solution: Hard Disk cable connected wrongly.
(Maraming posibilidad na may problema kapag walang display, check ang memory card (RAM), Video Card, Power Supply, Monitor, CMOS, Processor, Signal Cables, at mga bloated capacitors sa motherboard)

Error No.7: Power led is off
Solution: Check main power cord; check S.M.P.S; check motherboard connection
(Tsek mo ang main power cord o yung cord na isinasaksak sa main plug papuntang power supply ng PC, check mo na rin ang mga connections sa motherboard baka mga luwag)

Error No.8: Showing CMOS Error
Solution: Replace 3 Volt Battery of motherboard; set original setting manually; enter your search form terms, submit search form
(Maaaring palitan na lang ang battery na makikita sa motherboard, pagkatapos punta ka sa BIOS (by pressing f2 or del button) at itama mo lahat ng settings gaya ng sa Date and Time)

Error No.9: Showing HDD error or Hard Disk Failure
Solution: Check power cord; Check connection of HDD; Check Data Cable; Check Hard Disk parameters in CMOS or Auto detecting setting partitions by Fdisk command, then format it to set track 0.

Error No.10: Mother Board hangs due to unstabilized power supply
Solution: Check S.M.P.S; RAM not functioning properly; Software problem i.e. using pirated software; CPU fan not functioning properly

Error No.11: Dancing Screen
Solution: Check display card connection; virus problem; video memory problem

Error No.12: Shaking Screen
Solution: Earthing problem; Magnetic waves comes around

Error No.13: CPU cabinet shock
Solution: Check Earthing; Check main power cord

 Error No.14: Hard Disk making noise while processing
Solution: Unstabilized power supply; check for loose contact; do not use Y connectors for Hard Disk because it may create bad sector or weak Hard Disk.

Error No.15: Hard Disk hangs while processing
Solution: Check for bad sectors by using CHDISK or SCANDISK command. If found format the hard disk and set partition before that area. (Note: This is the only procedure to use hard disk with bad sector or to avoid bad sectors use standard power supply)

Error No.16: Hard Disk not detected
Solution: Check power connector; check Data cables; check jumpers

Error No.17: Partition not shown
Solution: Operating System where the Hard Disk formatted is not supported with present Mother Board

Error No.18: Windows Registry error
Solution: This will happen due to sudden ON/OFF of the system. Final solution is to Reinstall OS.

Error No.19: Display colour doesn’t match
Solution: Configure Display Card properly or reset the setting

Error No.20: Unknown Device found
Solution: Driver Utility may not be provided with OS. For this install driver for the device.